2.2 Important precautions
The NeedlingPen Aesthetic CONTROL is designed and approved for commercial use. The legal regulations and safety-related measures for operation vary depending on the country, region, intention and personal training.
Microneedling requires special precautions for health and safety and may only be carried out in the commercial sector by a suitably trained person in accordance with the applicable regulations and laws of the various countries.
Wear disposable nitrile or latex gloves before starting treatment and during all handling procedures.
Clean the skin area with a mild cleanser and disinfectant before treatment. You will achieve ideal results with the Matrixneedling system treatment procedure.
For treatment, use only topical and sterile preparations that have been tested for this type of application.
Use a new needle cartridge in sterile packaging for each treatment. Before treatment, check that the packaging is not damaged and that the expiration date has not passed.
The needle modules are sterile single-use products (consumables) and may only be used once.
Dispose of defective needle modules and those with damaged packaging in a special container in accordance with the regulations in force in your country.
Make sure that the needle modules never come into contact with contaminated objects, such as clothing. Contaminated needle modules must not be used and must be disposed of immediately.
Check the handpiece regularly for visible contamination.
Always hold the handpiece firmly before switching it on or placing it on the rest. If a handpiece is switched on without being held securely, vibrations may cause it to move and cause injury.
Avoid contact with freshly treated skin. Freshly treated skin areas must be protected from contamination and UV radiation.
Other irritating situations, such as visits to swimming pools and saunas, abrasive or chemical peeling and depilation of the treated areas should be avoided in the first two to three days after treatment.